Product material: modified asphalt polyester tire
Product color] black
Product pictures: 5 sheets (format: 800px*800px less than 2M)
Unit price (USD): 2.5
Unit: square meters
Size: Width: 1.0m Thickness: 1.2mm~4.0mm Length: 10m, 15m, 20m
Quantity price range
1.2mm thickness 2.5/sqm
1.5mm thickness 3.1/sqm
2mm thickness 4.3/sqm
3mm thickness 4.47/sqm
4mm thickness 4.92/sqm
Provide Chinese and English product introduction
PCM reaction bonding type/self-adhesive polymer modified bitumen waterproofing membrane
There are two types of PCM reactive bonding self-adhesive polymer modified bitumen waterproofing membrane. One is made of synthetic rubber and resin modified bitumen with special modifiers. The polyester tire is the carcass and the polyethylene film is the surface. Material or without film (double-sided self-adhesive), made of silicone oil anti-stick isolation film; the other is made of PET polyester film (aluminum plating, aluminum-plastic composite), self-adhesive rubber asphalt material, silicone oil anti-stick isolation film composition.
1 Extremely strong base layer “self-channeling prevention” performance: the coil binder forms an interface interpenetrating network with polymer cement slurry and silicate. The polymer cement slurry can flow and penetrate and diffuse before the initial setting, and the solidification strength gradually increases. The enhanced adhesion can limit the leakage caused by the damage of the coil to a local area and avoid the overall failure of the waterproof layer.
2 Trinity structure: PCM reaction bonding type self-adhesive polymer modified bitumen waterproofing membrane system not only adheres firmly to the special polymer cement slurry, but also effectively connects with the concrete structure to form a polymer cement slurry waterproof layer → PCM reaction adhesive The knot-type self-adhesive polymer modified bitumen waterproofing membrane is a three-in-one waterproof structure with a self-waterproof layer.
3 Simple construction and environmental protection: PCM reaction bonding type self-adhesive polymer modified bitumen waterproofing membrane system can directly use polymer cement slurry to paste on the wet base surface. The polymer cement slurry has no volatile solvents, does not pollute the environment, and adopts cold construction, so there is no fire hazard.
4 Good integrity: The seams of the coiled materials are very reliable whether they are lap joints or flat joints (lap joints are preferred), the waterproof layer has high strength and certain extension performance, good material stability, good corrosion resistance, long lasting.
Scope of application
1 Various industrial and civil building roofs, basements, tunnels, bridges, and reservoirs;
2 Waterproofing of civil air defense projects, subways, planting roofs and other projects.
PCM reaction bonding type self-adhesive polymer modified bitumen waterproofing membrane can be constructed by wet-laying method, that is, directly bonded with polymer cement slurry and concrete base, or pre-laid anti-adhesive technology; PET self-adhesive rubber modification Asphalt waterproofing membrane is generally constructed by wet paving method.
Basic treatment, scraping polymer cement (mortar) slurry, rolling method, spreading method, lap method
Storage and packaging
1 Width: 1.0m Thickness: 1.2mm~4.0mm Length: 10m, 15m, 20m
(Note: Self-adhesive waterproof membranes of other specifications and sizes can be negotiated between the supplier and the buyer.)
2 Sealed and packed in special plastic bags, stored in a dry, ventilated environment to prevent sun and rain;
3 Different types and specifications should be stacked separately, and should not be inclined or cross-pressured
4 The coils should be laid flat, the stacking height should not exceed four layers, and the shelf life is one year;
5 Keep away from fire sources during transportation and storage.