0T801 external wall transparent waterproof glue
Qinglong OT801 exterior wall transparent waterproof adhesive is a polymer flexible transparent colorless exterior wall waterproof coating refined with special copolymer emulsion as the base, mixed with synthetic rubber emulsion modifiers, surfactants, and plasticizers.
Transparent, does not turn white or yellow when exposed to water
1 Colorless, transparent, and will not damage the original wall decoration effect after coating, and will not turn yellow and dust;
2 Heat resistance, UV resistance, ozone resistance, acid and alkali resistance, and a wide range of adaptation to temperature;
3 The coating film has good film-forming properties, soft and tough;
4 Using water as the dispersion medium, it is non-flammable, non-toxic, tasteless, and does not pollute the environment, and is an environmentally friendly product;
5Cold construction, safe operation, convenient construction, can be directly sprayed, painted, brushed, or scratched on the wall;
6 The film has microporous air permeability, which is suitable for heat evaporation in the humid climate in the south without agitation;
7The amount is small and the cost is cheap.
2 Scope of application
1 Waterproof repair of external wall leakage of various buildings;
2Apply to the waterproof treatment at the interface of various facing materials;
3 Waterproof and moisture-proof surface of various interior and exterior wall decoration materials.
1 Base surface cleaning. Use detergent, wire brush and rag to clean the base layer of the wall as much as possible, but try not to damage the original surface layer gloss;
2 Use a brush to paint the transparent waterproof glue on the wall and the joints of the facing bricks. Be careful when painting;
3 Generally, 2-3 times of brushing are sufficient. When brushing, pay attention to the first coating is dry because it does not stick to your hands and then apply again, and the brushing direction should be crisscrossed:
4 If the viscosity is too high during the construction process, it can be diluted with clean water, but the amount of water should be as small as possible.
Solid storage and packaging
1 Materials should be sealed and stored in a cool and ventilated place at 5℃-30℃, with a shelf life of 12 months;
2Products are packed in plastic drums: 1kg/drum, 4kg/drum, 10kg/drum, 20kg/drum.
Matters needing attention
1 It cannot be used under 5℃ or in a humid and unventilated environment, otherwise it will affect the film forming effect;
2 Before construction, the base surface must be dry, free of stagnant water, floating wind, oil stains, and unevenness;
3 If it rains during construction, please stop the construction and protect the construction area;
4 Not suitable for long-term flooded parts.